Evaporative Air Conditioning Perth - Brivis Air Conditioning - Split Systems

Evaporative Air Conditioning Units and Systems Perth, Commercial Airconditioning Western Australia - Metro Air ::: Air Conditioning Excellence

At Metro Area we offer a range of ducted evaporative systems and offer high quality units that are quieter and more cost-efficient. We also individually design the system to ensure correct airflow to all areas and follow up after installation to ensure your system is operating at its peak efficiency. With us you can have peace-of-mind that your system will be the best value for money and our experienced installation service encompasses the utmost care and clean up thoroughly once they are completed. Call us today for a free in-home quote.

Contour Series

The lowest on your roof
The Contour Cooler is the least obtrusive evaporative cooler in Australia. Its patented sloping base offers the lowest profile on your roof, which is ideal if you don't want to alter the look of your home. The Contour is also available in the five most popular roofing colours in Australia.

The most advanced technology
The Contour Cooler has unique features which make it far more effective at cooling your home than other coolers while requiring the least amount of water and maintenance. Every stage of the Contour's operation has been thought about and designed to make the cooler's operation more reliable, discreet and healthy for you.

When you turn your cooler on inside the home, the Contour begins its Pre Wet cycle. Clean, fresh water enters the cooler and begins soaking the cooling pads before the fan even starts. This ensures that once the fan does start, the pads will provide you with cool air inside your home immediately.

The unique shape of the Contour's base means it holds up to a third less water than other coolers, saving valuable water during the hot Australian summer months.

Brivis coolers are the only ones that use a pump which sits in its own sealed waterproof chamber, ensuring that the pads are soaked in clean water all the time. The Synchro-drive pump also performs self-diagnosis to ensure that if anything is obstructing the water flow, it spins in the opposite direction to clear it.

The water is pumped into the unique Brivis Aqua-Duct. With large channels and drain holes, every pad is saturated, evenly and quickly. Once the pads are saturated, the fan turns on.

The Contour has a variable speed fan which gives you a wide range of speeds and allows the cooler to run much slower than other coolers. This is great on a hot night when all you want is a gentle breeze to keep you cool so you can get to sleep.

The air is pushed from the fan through the unique Contour ServoSeal and into the ductwork in your ceiling. The ServoSeal is the only motorised cooler seal on the market. The seal is important because it retains warmth inside your house on a cold day when it's closed, and manages the airflow when it's open. The ServoSeal does this by directing air straight down into your ducts rather than turbulent air directly from the fan. This increases cool airflow into your home and reduces noise.

When you turn your cooler off, the Contour automatically runs a Fresh Start operation. The tank is emptied and thoroughly flushed clean which means that there is no dirty water or sediment sitting in the cooler before it starts up again.

Guaranteed to last
The Contour Cooler is designed and made in Australia to withstand our variable and often harsh climate. The plastic housing is made of a tough UV-stabilised plastic to resist the sun's rays, and is designed for strength and durability. The Contour's high tech electronics are easy to access and are kept dry in a safe, watertight casing for added longevity.

The most choices
The Contour has several different options and models to choose from so that you can select the right cooler for your needs.
The Contour has three controller options - the Net worker, the Programmable or the Manual Controller.

Introducing the only water saving technology available in evaporative cooling

AquaSave doesn't just save you water

Exclusive to Brivis, our leading edge AquaSave technology saves you up to 45% water a year compared to conventional systems, ...saving you precious water and money. AquaSave is exclusively available only on Australia's own market leading Brivis Contour range. The Brivis Contour can save you up to 50% on installation costs and is up to 70% cheaper to run than refrigerated air conditioning - Now that's really COOL!

What's so cool about AquaSave?

Brivis Contour coolers with AquaSave cleans the water used in the cooling process avoiding any unnecessary wastage. In fact, they only use enough water to replace that lost through the natural cooling process of evaporation. This is obviously ideal in places where your water is valuable or if your bank balance is low.

It's great for the environment - as well as your home environment

The Brivis Contour with AquaSave is great for the environment by conserving water. Ideally suited to an active Australian summer lifestyle fresh air is drawn in and old stale air expelled from the home rather than re-circulated like some other systems do. This enables you to keep your home open and cool while you and your family enjoy all the benefits of summer in complete comfort. Since water is used to cool the air it won't be dry and uncomfortable and you won't suffer dry eyes or skin.

AquaSave. Longer lasting and with increased protection.

The AquaSave feature prevents the build up of scale and salt, which, over time may adversely affect any cooler's operation. AquaSave provides increased durability and continuous clean and efficient cooling. Of course Brivis continues our commitment to Quality and Service to all our valued customers and offers an extended warranty on all Brivis Contour coolers. The Brivis Contour with the exclusive AquaSave feature makes your choice for whole home cooling easy because the best just got better.

Profiler Series

The Brivis Profiler is the latest innovation from Brivis. It uses advanced technologies developed for the Brivis Contour series to ensure quality and reliability.

For example, the Brivis Profiler incorporates the Brivis designed fan which maximises airflow with quiet operation.

In the Brivis Profiler, the AutoRefresh water management system controls the amount of clean water added to the system. Once a pre-determined number of fill cycles have been completed the cooler will automatically flush the entire tank and refill it with clean water. Whilst the water is being refreshed the cooler continues to operate, unlike coolers that use a dump and fill cycle to refresh the tank water.

When cooling is no longer required the Brivis Profiler will automatically run the FreshStart operation which means there is no dirty water or sediment sitting in the cooler before it starts up again.

Options

The Brivis Profiler is available in four colours and five capacities. It can be connected to a range of wall controls including the versatile Brivis Networker.

The Brivis Profiler can also be fitted with a WinterSeal to prevent loss of heat in winter.

Brivis Logo'

Advance

The Brivis Advance cooler is the latest innovation from Brivis. It has been developed from the technology incorporated in the Brivis Profiler to create a stylish cooler for both new installations and replacement of old coolers.

The Brivis Advance cooler uses the AutoRefresh water management system and has a sloping trough which keeps the water moving towards the pump and contantly circulating though the system. This Brivis Advanve cooler has the FreshStart operation fitted as standard.

The Brivis Advance has a variable speed fan allowing the cooler to run slow when all you want is a gentle breeze to keep you cool.

Options
The Brivis Advance is available in three colours - Charcoal, Terra Red and Beige.

To control the cooler, there is a choice of three different controllers, The Networker, the Programmable Controller or the Manual Controller.

The WinterSeal is available to prevent heat escaping in winter.

A FreshStart version of the cooler is also available.

Controllers

You're in control
To give you maximum control over the way you cool your house, we have three compact wall controllers to choose from. Available in manual and automatic models, each controller is easy to read, unobtrusive and technologically advanced, without being unnecessarily complicated to use.

The Networker
The Networker can operate in either Auto or Manual modes. In Auto mode, you set your own comfort level, then leave the rest to the Networker. It will maintain the level you have chosen by automatically adjusting the cooler to increase or decrease the fresh cool air coming into your home.

The Networker also allows you to preset times to turn the cooler on or off. This means that it can turn the cooler off after you've gone to sleep, or on before you get home. The Networker is designed with an easy-to-use rotary dial and a digital screen to make it easy to read. The Networker also allows you to control multiple coolers, or a cooler and a heater using the same wall controller.

The Programmable Controller
The Programmable Controller can operate in either auto or manual modes. In auto mode, you set your own comfort level, then leave the rest to the controller. You can also preset times to turn the cooler on or off.

The Manual Controller
The Manual Controller allows you to turn on the pump or fan or both and gives you control of the fan speed. The Manual Controller does not have any auto functions and therefore requires you to adjust the fan speed as the temperature increases.

Components

State-of-the-art-Design of ductwork and componentry ensures efficient evaporative cooling.

Superior Performance guaranteed to improve by up to 20% with Polyaire's patented design Superflow insert.

10 Year Warranty of Polyaire's products when the entire system is comprised of Polyaire's air conditioning products.

Cutting Edge Technology is at your fingertips with Polyaire's complete range of air conditioning products.

Click on one of the Blue Boxes to enlarge image and see a product description.

To ensure that your air conditioning functions to capacity, it is essential that you select the right ducting and componentry to suit your system.

The Polyaire range adapts to all Evaporative, Reverse Cycle and Gas Ducted systems to ensure maximum efficiency.

Whether yours is a heating, cooling or reverse cycle application, you must insist on Polyaire - The leading edge in Australian air movement technology.